aboutus

Hydraulic Motors

back
  • image
    MASCOT LD series hydraulic motors are developed for high speed applications and perform with high efficiency in tough conditions. These motors find uses mainly in Wagon Tippler, Side Arm Charger, Slew Drive and Paddle Feeder.

    The compact size, light weight and ease of installation make these motors highly suited also for mobile applications. Several mounting options are available for high radial load applications.

    The axial load capacity of LD series motors is high. This makes them very suitable for use in Paddle Feeder Wheel Drive and other applications where axial forces are more.

    Parking brake at the front side of the motor ensures high holding torque.

  • image
    MASCOT MD series hydraulic motors are designed for high power and high speed applications. Most of the belt conveyors are driven by MD series motors. In addition, these motors are most suited for use in Feeder Breaker, Ball Mills and Bowl Mills. Optionally, a brake can be fitted in front end of the motor.

    The motor displacements available range from 8 lit/rev. to 15 lit/rev. They aim to provide a wide variety of precise hydraulic motor and pump combinations. These motors can take heavy shock loads due to incorporation of robust front bearing arrangement.

  • image
    MASCOT MDS Series hydraulic motors are designed for high power and high speed applications.

    These motors are exclusively developed for Wagon Tippler, Side Arm Charger & Paddle Feeder Hydraulic Drive Application due to high radial & Axial Load capacity. In addition, these motors are also most suited for use in Feeder Breaker, Ball Mills and Bowl Mills. Optionally, a brake can be fitted in the rear end of the motor. The motor displacements available range from 9 lit/rev. to 15 lit/rev.



  • image
    MASCOT 820 Series Hydraulic Motors aim to provide high torque for high speed applications.

    These motors incorporate the “high-flow” distribution system. These motors are extensively used for Wagon tippler and high inclination conveyors where high brake torque is required. Hydraulic brake (static) upto 16000 kgm are used in these motors which made these motors an ideal choice for high braking torque application.The motor displacements available range from 15 lit/rev. to 30 lit/rev. These motors can take heavy shock load due to incorporation of robust front bearing arrangement.



  • image
    MASCOT HD series hydraulic motors aim to provide high torque for low speed applications. On specific request, the motors can also be custom-made to suit high speed requirements. These motors incorporate the high-flow distribution system.

    The HD series motors are always torque arm mounted, making them the ideal choice for applications such as Bucket Wheel Drive, Apron Feeder, Kiln Drive etc., to eliminate misalignment.

    The motors run with high efficiency and the power output from the motor is as high as 1000 KW. The HD series motors ensure trouble free operation even in dusty environmental conditions.

  • image
    MASCOT CR Series Hydraulic motor are reliable for Heavy duty high torque low speed applications. These hydraulic motors are mostly working in mines and steel sectors, where continuous duty cycle with high efficiency on varying load conditions is demanded.

    This manual provides the necessary information for installation and maintenance of hydraulic motors, however the development hydraulic motor is a continuous process as we therefore reserve the right to introduce amendments in the manual as we deem necessary without notice and obligation.