aboutus

MDS SERIES

back

MDS SERIES - Description

MASCOT LD series hydraulic motors are developed for high speed applications and perform with high efficiency in tough conditions. These motors find uses mainly in Wagon Tippler, Side Arm Charger, Slew Drive and Paddle Feeder.

These motors are exclusively developed for Wagon Tippler, Side Arm Charger & Paddle Feeder Hydraulic Drive Application due to high radial & Axial Load capacity. In addition, these motors are also most suited for use in Feeder Breaker, Ball Mills and Bowl Mills. Optionally, a brake can be fitted in the rear end of the motor. The motor displacements available range from 9 lit/rev. to 15 lit/rev.

They aim to provide a wide variety of precise hydraulic motor and pump combinations.

These motors can take heavy shock loads due to the incorporation of a robust front bearing arrangement.

OPTIONS
image
Customised shaft.
image
Integral multi plate disc brake
(Static / Parking).
image
High speed versions.
image
Double shaft.
image
Through hole shaft of various sizes.
image
Custom finish.
image
Deep water submersible.
image
Non magnetic material.
image
Dual Displacement.
image
Shrink disc coupling
image
Shaft or Flange mounting
FEATURES
image
Long Life
image
High Mechanical Efficiency
image
Constant torque output
image
Smooth low speed performance <1rpm
image
Resistance to thermal shock
image
Double shaft sealing
image
Shock Resistance
image
Low noise
image
Super low noise.
image
Corrosion resistant material.

MDS SERIES - Technical Specification

HYDRAULIC MOTOR - MASCOT

click on the image to enlarge

MOTOR FRAME SIZE
SPECIFICATION
DISP(*) PER REV
TORQUE
( THEORETICAL )
TORQUE MAX
SPEED RATED
SPEED MAX **
PRESSURE RATED
METRIC
CM3 /REV
NM/BAR
NM
RPM
RPM
BAR
HMS 9.0
9080
144
47520
80
120
345
HMS13.5-15.0
13540
215
70950
75
110
345

** High speed version upon request.
* Any other displacement upon request.


MDS SERIES - Dimensional Specification

Dimensions: Motors External Shaft with Male Splines
 
Click on the image to enlarge

 
   
MOTOR TYPE
A
(MM)
B
(MM)
DW
(MM)
D
(MM)
E
(MM)
WEIGHT
(KG)
MAIN CONNEC.
(A1,A2,C1,C2)
DRAIN CONNEC.
(D1,D2)
HMS 9.0
667
898
N150x5x30x28x10B
171
575
678
SAE 1¼ "
BSP ¾ "
HMS 13.5
710
898
N150x5x30x28x10B
171
575
772
SAE 1¼ "
BSP ¾ "

Brake : Static / Parking



MOTOR TYPE
A
(MM)
B
(MM)
C
(MM)
D
(MM)
BRAKE RELEASE PRESSURE (BAR)
BRAKE TORQUE MAX (NM)
HMS 9.0
374
152
64.5
187
20-30 BAR
42,000
HMS 13.5
374
152
64.5
187
20-30 BAR
50000


* Technical Dimensions are subjected to change without prior notice.